Loading...
Dashboard
  • About
  • License
P1IB

P1 Interface Bridge

IP Address -
MAC -
Wi-Fi RSSI -
Wi-Fi Tx -
Wi-Fi Connection Count -
Uptime -
MQTT State -
Meter Telegrams -
Electric Meter -
Meter Mode -
Energy import -
Energy export -
Momentary power import -
Momentary power export -
Current L1/L2/L3 -
Telegram interval -
Wi-Fi SSID
Wi-Fi Password
Main Fuse Size
  • 6A
  • 10A
  • 16A
  • 20A
  • 25A
  • 32A
  • 50A
  • 63A
  • 125A
  • 250A
  • 500A
  • 750A
  • 1000A
MQTT Enabled
MQTT Broker IP
MQTT Broker Port
This is the port of your broker server. Default port is 1883
Port must be a number!
MQTT Broker Username
MQTT Broker Password
MQTT Home Assistant Auto Discovery
Sensors will be registered automatically in Home Assistant if enabled.
MQTT Json State
All sensors state payload will be combined into one json object on topic 'p1ib/sensor_state'.
MQTT MAC Suffix
All sensors will be suffixed with the Wi-Fi MAC. This must be enabled if multiple p1ib devices are connected to the same MQTT broker/HA instance.
MQTT Topic Prefix
Add a prefix to the topic for the published data. For instance, by adding 'some_prefix/', the data will be published on 'some_prefix/p1ib/...'. Note that p1ib will publish data on 'homeassistant/...' for registration of sensors regardless of the topic prefix.
Prefix must end with '/'. No whitespaces nor special characters!
MQTT Certificates
Connect to TLS enabled MQTT broker (AWS IoT Core or Azure IoT Central)
MQTT Root CA
MQTT Device Certificate
MQTT Device Private Key
MQTT Firmware OTA
Enable firmware updates through MQTT.
Advanced Settings
NTP Servers
Remote Debug Log
Send debug logging to given IP. Run "netcat -ul [port]" to read the debug log
Remote Debug Log IP
Must be a valid IP address
Remote Debug Log UDP Port
Port must be a number
Wi-Fi Custom SSID
When enabled, this will override the selected SSID from the list of scanned SSIDs!
DHCP Client
When enabled, static ip will be disabled.
Static IP Settings
Must be a valid IP address
Must be a valid netmask address
Wi-Fi TX Power Limit
()
Wi-Fi Retry Connect Timeout
Number of seconds until entering AP mode if no connection can be made to the configured ssid. Default value is 60s.
Must be a number
Wi-Fi Connect Attempt Timeout AP Mode
Number of minutes until a new attempt to connect to the configured SSID is made when in AP mode. Default value is 15 minutes.
Must be a number higher than 0
Login Protection Password
The username is 'admin' when asked for credentials. Empty password disables login protection.
Whitespaces not allowed
Reduced Data Mode
OBIS Hysteresis
Current Installed Firmware
Build aae1e85
Build Date 20240212
Available Firmwares



Factory Reset

All settings will be reset to factory defaults, and the device will enter AP mode.

Are you sure you want to reset the device?

Disclamer
Energy Recordings

Energy Recordings Agreement

When activating the feature "Energy Recordings", the power meter energy import and export values are saved to the internal flash memory of the P1IB hardware once each night (00:00).

As a side effect of the wear and tear of the flash memory by writing each night, the life expectancy of the P1IB hardware will be decrease.

By enabling this feature you agree to the terms described below, you acknowledge that you have read and understood the following terms and conditions, and you agree to be bound thereby.

1. Warranties of the P1IB is not covered for flash failures or flash errors of any kind.
2. A e-fuse will be set and cannot be undone. The fuse is set for the manufacturer to be able to determine if the energy recordings feature have been enabled.

About P1IB

P1IB - P1 Interface Bridge


Firmware (and hardware) to decode messages sent from a range of different AMS (Advanced Meter Systems)
with the P1/HAN (RJ12 6P6C) electrical interface port.

https://remne.tech/p1ib

https://github.com/remne/p1ib

The p1ib license

Copyright (c) 2023 Remne Technologies AB (hello@remne.tech).
All rights reserved.

Permission to use and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Restarting...

Settings are now saved. Reloading page in...

Updating firmware...

Welcome to P1IB!

This is either the first time starting your P1IB, or you have upgraded the firmware.

Please go to the settings page and setup your device.

Firmware build: aae1e85